Search

Inertia friction welding (IFW) is a robust joining technique, particularly for hybrid structures composed of similar or dissimilar alloys. The highly transient thermal responses during friction heating produce variations in heat generation and temperature distribution, which are crucial for designing and controlling the IFW process. This study establishes a finite element (FE) model of the IFW process for dissimilar superalloys and investigates the transition of the interfacial friction regime and its impact on the transient thermal responses. The in-process state variables, including the frictional stress and heat flux, along with their spatial distributions at the welding interface, are obtained through FE simulations. The predicted results indicate that the transient transition of the friction regime produces two Coulomb friction zones accompanied by a shear friction zone. To capture the transient evolution of the friction regime, a novel phenomenological formula is developed. This model accurately predicts the shrinkage and disappearance of the two Coulomb friction zones and the enhancement of the shear friction zone from the initial 0.42 R0–0.87 R0 (where R0 is the workpiece radius) to the entire interface during the IFW process. The variations in interfacial heat flux, frictional stress, and temperature caused by the transition of the friction regime are comprehensively analyzed. Our results reveal that the transition from the Coulomb friction regime to shear friction regime at the interface is beneficial for temperature homogenization at the welding interface. The FE simulation results are validated against published experimental measurements, which confirms the accuracy and reliability of the FE model.

Repetitive implant-related infections (IRIs) are devastating complications in orthopedic surgery, threatening implant survival and even the life of the host. Biofilms conceal bacterial-associated antigens (BAAs) and result in a ''cold tumor''-like immune silent microenvironment, allowing the persistence of IRIs. To address this challenge, an iron-based covalent organic framed nanoadjuvant doped with curcumin and platinum (CFCP) was designed in the present study to achieve efficient treatment of IRIs by inducing a systemic immune response. Specifically, enhanced sonodynamic therapy (SDT) from CFCP combined with iron ion metabolic interference increased the release of bacterial-associated double-stranded DNA (dsDNA). Immunogenic dsDNA promoted dendritic cell (DC) maturation through activation of the stimulator of interferon gene (STING) and amplified the immune stimulation of neutrophils via interferon-β (IFN-β). At the same time, enhanced BAA presentation aroused humoral immunity in B and T cells, creating long-term resistance to repetitive infections. Encouragingly, CFCP served as neoadjuvant immunotherapy for sustained antibacterial protection on implants and was expected to guide clinical IRI treatment and relapse prevention.

For the collaborative treatment and resource utilization of an industrial coke oven on municipal solid waste (MSW), this study used MSW to prepare refuse-derived fuel (RDF). The influence of different mix ratio between RDF and coal on coking products was considered, and technical and economic analyses were conducted. The results showed that under the low mixture ratio (3%), the pyrolytic carbon obtained basically met the class III standard of metallurgical carbon. In the experiment of medium mixture ratio (25%, 30%, 35%), the product contained a certain amount of calorific value, lower than that of the metallurgical coke. It might be that the ash content increased, and such product can be used for civil coke or chemical coke. When the mixture ratio was 100%, the calorific value of pyrolysis carbon was 7.53 MJ/kg, representing 25.7% of the calorific value of ordinary coke. The gas production rate of the discharged gas was 0.35, and the calorific value is 14.0 MJ/kg, reaching 73.6% of the coke oven gas. Under the condition of no coal input, the MSW was converted into usable energy. The results demonstrated that coke oven pyrolysis with 100% RDF addition is the most feasible way to recycle resources and energy.

Abstract The miniaturised wideband filter with good frequency selectivity and wide stopband is proposed, which is based on three‐dimensional (3D) heterogeneous integrated passive device technology. The proposed sixth‐order wideband bandpass filter is based on the magnetic‐coupling‐loaded highpass‐lowpass lumped topology and implemented by the 3D heterogeneous integration process, integrating GaAs‐based and Glass‐based micro‐nano‐scale processes together. Then, lumped inductors are designed in the Glass substrate with low dielectric loss tangent and realised by a three‐dimensional spiral structure. Therefore, the inductors have high quality factors and small sizes. The lumped capacitors are designed using the GaAs thin film process. Finally, a prototype with a 3‐dB fractional bandwidth of 42% is designed and fabricated at 3.875 GHz (f0). The upper‐stopband attenuation higher than 30 dB is extended to more than 5.15f0. It occupies only 0.014 × 0.018 λ02 (1.1 × 1.42 mm2), where λ0 is the free‐space wavelength at f0.

Abstract A miniaturised high‐isolation K‐/Ka‐band diplexer with exceeding adjacent channels using 3D antarafacial channel integration and vertical‐quasi‐coaxial‐based matching network is proposed. For smaller size, lower loss and lower channel interference, the high‐order low‐pass filter for the K‐band channel and the four‐line‐interdigital‐coupled wideband bandpass filter for the Ka‐band channel are respectively designed on two low‐loss glass‐based substrates, and these two substrates are integrated on the two antarafacial surface of the mounting board. The vertical‐quasi‐coaxial (VQC) embedded in the mounting board is not only used as three‐dimensional (3D) interconnection of the two antarafacial channels but also designed as the constituent part of the matching/isolation network, and this can effectively decrease the impedance traction caused by the Ka‐band filter for the K‐band channel of the diplexer. In addition, four transmission zeros of the K‐band filter are designed at the whole passband of the Ka‐band channel to improve the isolation to the K‐band channel for guaranteeing the performance of the diplexer at the Ka‐band channel. Furthermore, working principle, design method and test solution of this proposed K‐/Ka‐band diplexer are well illustrated, and the high‐isolation (>40 dB) in very adjacent wideband channels at K‐band (18–23.5 GHz) and Ka‐band (25.8–31.6 GHz) is achieved within a tiny size of 9 × 4 × 0.87 mm.

Abstract Soft-tissue sarcomas (STS) emerges as formidable challenges in clinics due to the complex genetic heterogeneity, high rates of local recurrence and metastasis. Exploring specific targets and biomarkers would benefit the prognosis and treatment of STS. Here, we identified RCC1, a guanine-nucleotide exchange factor for Ran, as an oncogene and a potential intervention target in STS. Bioinformatics analysis indicated that RCC1 is highly expressed and correlated with poor prognosis in STS. Functional studies showed that RCC1 knockdown significantly inhibited the cell cycle transition, proliferation and migration of STS cells in vitro, and the growth of STS xenografts in mice. Mechanistically, we identified Skp2 as a downstream target of RCC1 in STS. Loss of RCC1 substantially diminished Skp2 abundance by compromising its protein stability, resulting in the upregulation of p27Kip1 and G1/S transition arrest. Specifically, RCC1 might facilitate the nucleo-cytoplasmic trafficking of Skp2 via direct interaction. As a result, the cytoplasmic retention of Skp2 would further protect it from ubiquitination and degradation. Notably, recovery of Skp2 expression largely reversed the phenotypes induced by RCC1 knockdown in STS cells. Collectively, this study unveils a novel RCC1-Skp2-p27Kip1 axis in STS oncogenesis, which holds promise for improving prognosis and treatment of this formidable malignancy.

Objective:. Real-world diagnostic and treatment data for pancreatic cancer in China are lacking. As such, the present study investigated the clinical characteristics, diagnosis, and treatment of advanced pancreatic cancer (including locally advanced and metastatic disease) in the Hospital-based Advanced Pancreatic Cancer Cohort in China of the China Pancreas Data Center database. Methods:. A total of 5349 Chinese patients with advanced pancreatic cancer were identified from a database. The entire course of real-world pancreatic cancer management was analyzed. Results:. The proportion of patients with advanced pancreatic cancer was higher among males than females (62.4% vs 37.6%, respectively). Patients typically had a history of hypertension (30.8%), diabetes (21.6%), and cholangitis (20.2%). Abdominal pain (51.6%), abdominal distension (27.1%), jaundice (20.1%), and weight loss (16.3%) were the main symptoms observed in patients with advanced pancreatic cancer in this cohort. Serum carbohydrate antigen (CA)19-9 is one of the most common tumor markers. In the present study, 2562 patients underwent first-line therapy. The median progression-free survival (PFS) for patients undergoing first-line therapy was 4.1 months. The major options for first-line therapy included gemcitabine (GEM) plus S-1 (GS/X) (23.4%), nab-paclitaxel plus GEM (AG) (18.1%), oxaliplatin, irinotecan, and leucovorin-modulated fluorouracil (FOLFIRINOX; 11.9%), nab-paclitaxel plus S-1 (AS) (8.9%), and GEM combined with oxaliplatin/cisplatin (GEMOX/GP) (7.6%). The AS and GS/X regimens were associated with the highest PFS rates. Conclusion:. This is the first study to report multicenter, real-world data regarding advanced pancreatic cancer in China. Results revealed that real-world treatment options differed from guideline recommendations, and PFS was shorter than that in previously reported data. Improving intelligent follow-up systems and standardizing diagnosis and treatment of pancreatic cancer is recommended.

Abstract A new CTOD calculation method is investigated in this study, considering the FPZ and the effective Young’s modulus. The calculated CTOD values from four theoretical models are compared with the measured CTOD values from the three-point beam experiments, and the differences between them are analyzed. The measured CTOD consists of two parts: (1) the displacement generated by the elastic–plastic deformation in the crack tip region, and (2) the displacement generated by micro-damage in the FPZ. CTOD value caused by micro-damage in the FPZ accounts for 81–92% of the overall CTOD. Thus, the FPZ and the effective Young’s modulus are introduced to modify the models for calculating CTOD. The result indicates that the modified plastic zone model is better than the strip-yield model, the plastic zone model and the modified strip-yield model in calculating CTOD, and CTOD error is reduced from 81 to 90% between the plastic zone model and the experiment to 4–34% between the modified plastic zone model and the experiment, with nearly half of the specimens having an error of less than 10%.

Abstract Objective To investigate the clinical and magnetic resonance imaging (MRI) features for preoperatively discriminating primary ovarian mucinous malignant tumors (POMTs) and metastatic mucinous carcinomas involving the ovary (MOMCs). Methods This retrospective multicenter study enrolled 61 patients with 22 POMTs and 49 MOMCs, which were pathologically proved between November 2014 to Jane 2023. The clinical and MRI features were evaluated and compared between POMTs and MOMCs. Univariate and multivariate analyses were performed to identify the significant variables between the two groups, which were then incorporated into a predictive nomogram, and ROC curve analysis was subsequently carried out to evaluate diagnostic performance. Results 35.9% patients with MOMCs were discovered synchronously with the primary carcinomas; 25.6% patients with MOMCs were bilateral, and all of the patients with POMTs were unilateral. The biomarker CEA was significantly different between the two groups (p = 0.002). There were significant differences in the following MRI features: tumor size, configuration, enhanced pattern, the number of cysts, honeycomb sign, stained-glass appearance, ascites, size diversity ratio, signal diversity ratio. The locular size diversity ratio (p = 0.005, OR = 1.31), and signal intensity diversity ratio (p = 0.10, OR = 4.01) were independent predictors for MOMCs. The combination of above independent criteria yielded the largest area under curve of 0.922 with a sensitivity of 82.3% and specificity of 88.9%. Conclusions Patients with MOMCs were more commonly bilaterally and having higher levels of CEA, but did not always had a malignant tumor history. For ovarian mucin-producing tumors, the uniform locular sizes and signal intensities were more predict MOMCs.

The catalytic performance of different acidic catalysts for diethyl oxalate synthesis from the one-step transesterification of dimethyl oxalate and ethanol was evaluated. The effects of different factors (e.g., acidity, electron accepting capacity, cations type and crystalline water) on the catalytic activity of acidic catalysts were investigated respectively. It was proposed and confirmed that the transesterification reaction catalyzed by a Lewis acid (FeCl3) and a Bronsted acid (H2SO4) follows a first-order kinetic reaction process. In addition, the Lewis acid-catalyzed transesterification processes with different ester structures were used to further explore and understand the speculated reaction mechanism. This work enriches the theoretical understanding of acid-catalyzed transesterification reactions and is of great significance for the development of highly active catalysts for diethyl oxalate synthesis, diminishing the industrial production cost of diethyl oxalate, and developing downstream bulk or high-value-added industrial products.